This controller can only be used with LED Magic Strips. Using the Magic LED Controller, you can set to any color or dynamic function such as chasing, sequencing, and changing. The strip allows you to create sequencing modes for each 3-LED unit.
How to use it?
1. Connect the load wires at first, following by the power wires; please ensure that short circuit cannot occur between connecting wires before you turn on the power.
2. In order to receive the infrared control signal normally, it is necessary to ensure that there is no barrier between the remote control and infrared detector.
3. The key-press functions are: Number 1 to 9: program choosing button; corresponding to program 1 to program 9.
Rapid: speed change button, up direction
Slow: speed change button, down direction
Brightness: change button, up direction
Reset: the program back to the program 1; low speed, red color, the highest brightness
ON: open the output OFF: close the output
Left: move to the left Right: move to the right
1. Under the program 1, 2, 3, 4, 5, users can use 7 color buttons: green, blue, red, cyan, white, purple, yellow on the left side of IR remote panel; Under the program 1, 2, 5, 7, 8, 9, users can use the button ‘Left’ and ‘Right’ to change the move direction.
Attention:
1. Supply voltage of this product is DC12V; never connect to other sizes of Voltages.
2. Never connect two wires directly in case of short circuit.
3. Load wires should be connected correctly according to the connecting diagram offers (download user manual).
4. Don't peel off the label on the controller in case any indication of information will be missed.
5. Warranty of this product is one year. In this period, we guarantee replacement or repairing with no charge, but exclude the artificial situation of damaged or overload working.